Skip to main content

AA Alive Sdn Bhd · SSM 1204108-DEst. 2016Superbrands Malaysia 2025Batu Caves · Kota Kinabalu · Kuching

WhatsApp 010-905 2891

Sysmex vs Mindray Haematology Analysers: A Neutral Comparison

Two of the brands you will see most often on Malaysian quotations. How their compact 3-part and small-laboratory 5-part analysers measure, what the makers’ published specifications say, and why local service, reagent supply and registration usually decide the choice more than the badge.

Also called Sysmex vs Mindray, Mindray vs Sysmex hematology analyzer, XN-L vs BC-5150, XP-Series vs BC-30s

Published:

Two makers, two starting points

This is a neutral buyer’s comparison; AA Alive is not a distributor of either brand, and naming them does not mean we stock them. Sysmex is a Japanese in-vitro diagnostics company headquartered in Kobe, and haematology is its best-known field. Mindray is a Chinese medical device maker headquartered in Shenzhen, with patient monitoring, imaging and in-vitro diagnostics among its main lines. Both sell everything from compact clinic analysers to laboratory systems, and model names change, so always check the exact model you are quoted.

Sysmex families

XP-Series compact 3-part analysers for clinics; the XN-L series (for example XN-330, XN-430 and XN-530) for smaller laboratories; and the larger XN-Series for hospital laboratories.

Sysmex buyer’s guide

Mindray families

BC-series compact 3-part analysers such as the BC-20s and BC-30s; compact 5-part analysers such as the BC-5000, BC-5130 and BC-5150; and further 5-part families such as the BC-6000 and BC-700 series.

Mindray buyer’s guide

Compact 3-part analysers for GP clinics

Both makers’ compact 3-part analysers count and size cells by electrical impedance and split white cells into three groups. Compare a specific model against a specific model, from the current specification sheet.

Sysmex XP-Series (e.g. XP-100, XP-300)Mindray BC-30s
Counting methodDC impedance count and sizing; 3-part white-cell differentialImpedance count and sizing; 3-part white-cell differential
ReportedCBC with 3-part differential and WBC, RBC and PLT histograms21 parameters and 3 histograms
ThroughputUp to 60 samples an hour (XP-300, maker’s figure)70 samples an hour (maker’s figure)
Sample volumeAsk for the current specification sheet9.0 µL in whole-blood mode, with capillary whole blood supported
ConnectivityAsk for the LIS interface specificationBi-directional LIS, LAN, USB and Wi-Fi; barcode reader option
Reagent packsAsk for pack sizes and opened stabilityNormal and small pack sizes; lyse stored inside the analyser

Small-laboratory 5-part analysers

At the 5-part level the two makers use the same broad approach — a laser flow cell for the white-cell differential and an impedance channel for red cells and platelets — with different reagents and detail. The comparison below uses Sysmex’s XN-L instructions and Mindray’s BC-5150 product page; items marked “ask” were not stated in the document we checked.

Sysmex XN-L (e.g. XN-330)Mindray BC-5150
White-cell differentialFlow cytometry with a semiconductor laser and a fluorescent stainFlow cytometry with a semiconductor laser
Red cells and plateletsHydrodynamically focused (sheath-flow) DC detectionDC impedance with a 50 µm counting aperture
HaemoglobinCyanide-free SLS-haemoglobin methodAsk
Sample volume25 µL whole blood; 70 µL pre-dilutedAsk; capillary blood can be aspirated directly
ThroughputAbout 60 samples an hourAsk
Size and weightAbout 450 × 460 × 510 mm and 35 kg (XN-330), with 30 cm clear behindDescribed as Mindray’s lightest and most compact 5-part
Routine reagentsDiluent, lysing reagents, a fluorescent stain and a cleanerThree routine reagents with a two-year shelf life; two lyses held inside the analyser
ConnectivityAsk for the LIS interface specificationBi-directional LIS with HL7

What usually decides it

On paper, analysers in the same class from the two makers are closer than the marketing suggests. For a clinic or small laboratory, the choice is usually settled by what happens after delivery.

  • Service in your state: who repairs the analyser, how fast, and whether a loan unit is offered during long repairs.
  • Reagent supply: delivery times to your state, pack sizes that suit your daily volume, and opened stability.
  • Cost per reportable test at your real volume, including daily start-up, shutdown and controls — not the analyser price alone.
  • Controls and calibrators: who supplies them, how they are shipped and whether third-party controls are allowed.
  • LIS: whether the interface to your clinic system is proven, and who pays to set it up.
  • Registration: the MDA registration numbers for the exact model and every reagent, and the seller’s establishment licence.

Run the comparison on your own samples

  • Ask each supplier to run the same 20–40 of your patient samples across the range, including low platelet counts and samples your lab flagged.
  • Compare both results with your reference laboratory, and look at the flags as well as the numbers.
  • Time daily start-up, shutdown and maintenance, and ask how much reagent each uses on a quiet day.
  • Get both quotations on the same assumptions — volume, reagents, controls, service and LIS — so they can be compared line by line.
  • Whichever you choose, verify it before the first patient result.

Frequently asked questions

Is Sysmex better than Mindray?
Neither is better in every situation. Within the same class their methods are broadly similar. For a clinic, local service, reagent supply and cost per test at your volume usually matter more than the brand.
Which is cheaper to run, Sysmex or Mindray?
It depends on the model, the reagent package and your daily volume. Ask both for the cost per reportable test in your quietest month, including start-up, shutdown and controls.
Can I use Mindray reagents on a Sysmex analyser, or the other way round?
No. Each analyser uses the reagents specified in its instructions for use, and they must be registered with the MDA for that system.
Do both brands make 3-part analysers for GP clinics?
Yes. Sysmex has its compact XP-Series and Mindray its BC-series 3-part analysers such as the BC-30s. Compare the current specification sheets model against model.
Can either connect to my clinic system?
Both makers’ analysers offer LIS connections. Ask the supplier to confirm a working interface with your clinic software, and who sets it up and at what cost.
Do you sell Sysmex or Mindray analysers?
We are not a distributor of either brand. WhatsApp us your workload and we arrange written quotations for suitable analysers; each quotation names the brand, the model and who services it.

Get a written quotation

Tell us your clinic or lab type, daily workload and location. We match suitable models and send a written quotation that states who handles delivery, installation and training, and what each costs.

010-905 2891 · Mon–Sat, 9:00 am – 6:00 pm